small particle anti abrasive corrosion resistant coatings

small particle anti abrasive corrosion resistant coatings

Model No.︰BD707

Brand Name︰Baidun

Country of Origin︰China

Unit Price︰US $ 9.6 / Kg

Minimum Order︰100 Kg

Inquire Now

Product Description

Packing specification of BD707 small particle anti wear corrosive resistant coating:
Two component,10Kg/group,packed in a plastic drum

performance feature of BD707 anti corrosion abrasive resistant small particle coatings:
dark gray paste,small particle,room temperature curing)
BD707 wear resistant coatings(particle adhesive) and metal substrate has a high bonding strength           
Don't flow,with good formability,fast curing speed and good operation manufacturability
Suitable for the repairing and protecting of various wear,corrosion working condition    

product usage of BD707 small particle anti abrasion corrosion resistant adhesives:
BD707 wear resistant coatings(particle adhesive)  is the high performance wear & corrosion resistant polymerization ceramic material compounded by high performance wear resistant ceramic particles and modified toughening heat resistant resin.Widely used in the repairing of various wear-out parts and the preparation of wear & corrosion resistant coating on the surface of various machine part which has wear resistant,corrosion resistant requirements.

How to use of anti corrosion abrasion resistant small particle adhesive:
1. Surface treatment:Do coarsening treatment on the pending-repair part,grinding with angle grinder or sand blasting etc,the surface after coarsening treatment should be cleaned,the surface after this treatment should be the one coarsening,dry and fresh substrates,should be no greasy dirt and dust.
 2. Preparation:According to weight ratio or volume ratio 4:1,make A and B two components mix uniformly,and use it up within 30 min.Generally it’s while construction and configuration.Every time the most configuration quantity is not more than 1.5Kg,too much adhesive is solidified too fast,hasn’t been used up until the adhesive has partial solidified and can’t be used.According to the actual temperature,configuration can be properly a little more in winter and proper less in summer.If the temperature is too low,can properly heat up the A component to reduce viscosity for easy to configure.

Payment Terms︰ 30% T/T in advance as the deposit,the balance T/T before shipment

Product Image