Home
Factory location shows
Product Catalog
News
Company social media
Contact Us

Product Catalog 

wear resistant ceramic adhesives,ceramic special anti wear adhesive

  • wear resistant ceramic adhesives,ceramic special anti wear adhesive
  • wear resistant ceramic adhesives,ceramic special anti wear adhesive
  • wear resistant ceramic adhesives,ceramic special anti wear adhesive
  • wear resistant ceramic adhesives,ceramic special anti wear adhesive
  • wear resistant ceramic adhesives,ceramic special anti wear adhesive
Model No.︰BD181
Brand Name︰Baidun
Country of Origin︰China
Unit Price︰US $ 9.6 / kg
Minimum Order︰100 kg
Share on:

 Total 16 Related Items 
Prev1213141516Next
Auto next page:   SecondsPlay

Product Description

Packing specification of BD181 wear resistant ceramic adhesives:
Two component,5Kg/group(A component: 4Kg, B component: 1Kg),packed in a plastic drum.

performance features of BD181 high temperature ceramic special anti wear adhesive:

  black daub shape,the temperature resistant is 200℃,with strong initial viscous force                       It's consist of modified heat resistant toughening resin and special curing agent,aging resistant(can       reach more than 8 years),high temperature resistant,good toughness                                         Can cure at room temperature,can also heat for curing                                                       During constructing on the ceiling and facade,it doesn't flow and fall off.
  When it is used as repair agent,the highest working temperature is 180℃,when it is used as structural       bonding,the highest working temperature is 160℃

product usage of BD181 anti abrasion high temperature resistant ceramic adhesives:

mainly used in the bonding of wear resistant ceramic chip on the ceiling and facade of the equipment. With strong initial adhesion,it won't fall off without using magnet or other support measures during construction,optimizing construction technology and reducing construction cost)


How to use of high temperature abrasion resistant ceramic special adhesive:
1.  Surface treatment:Grinding or sand blasting to clean up the dust,greasy dirt and rust on the surface of adherend,finally clean it by cleaning agent.
2.  Configure adhesive: According to A:B(mass ratio)=4:1,make A and B two component mix uniformly
3.  Using adhesive:Make the configured adhesive be coating on the adherend surface uniformly.
4.  Curing:Full curing for 24 hours at room temperature,heat it up to the temperature of 80℃ and keep this temperature for 2 hours,then do the post curing,can get the higher strength(≥18MPa)
5.  The configured adhesive should be used up within the coating application time limit

 

performance index:

BD181 wear resistant ceramic special adhesive physical mechanical properties table
color physical state density(g/cm3) compressive strength(kg/cm2)
GB/7124-2008
shear strength(kg/cm2)
GB/1041-2008
impact strength(J/cm2)
GB6328-1999
black paste/thixotropy 1.48 1101 183 60

 

BD181 wear resistant ceramic special adhesive curing features table(test condition:temperature:20~25℃,relative humidity:55)
coating time limit(min) curing time need curing time before full load operation working temperature(℃) the highest temperature resistant(℃)
30~60 room temperature:24h or room temperature:1h+80℃:2h 36h -60~180 200

 

Special version:
1.  This parameter is for laboratory conditions,due to the actual working condition is more complex,suggest users do pretest according to actual working condition
2.  When the environment temperature is below  15℃,the curing time will prolong,should take proper heating measure
3.  When the environment temperature is more than 25℃ or the mixing quantity is too large,the curing speed will expedite,should properly shorten the application time of coating after mixing.

 

Transportation storage of anti wear high temperature ceramic adhesives:
1.Sealed storage in the cool and dry place,the warranty period is 1 year.
2.Avoid placing it upside down,knocking against and transporting it as a non-dangerous product during transportation.

http://www.realbond.net/en/wear_resistant_ceramic_adhesive/4154.html

Payment Terms︰30% T/T in advance as the deposit,the balance T/T before shipment
Product Image






 
Related Products
magnetic separator anti abrasion chemical resistant protective coatings
magnetic separator anti abrasion chemical resistant protective coatings
US $ 6.8
desulfurization tower and slurry pipeline anti wear chemical resistant coating
desulfurization tower and slurry pipeline anti wear chemical resistant coating
US $ 6.8
high temperature abrasion resistant silicon carbide coatings
high temperature abrasion resistant silicon carbide coatings
US $ 6.8
high temperature impact and wear resistant protective coating
high temperature impact and wear resistant protective coating
US $ 6.8




Home  |  Factory location shows  |  Product Catalog  |  News  |  Company social media  |  Contact Us  |  Sitemap  |  Mobile Version

Powered by DIYTrade.com  Build your FREE website !
Find Best Price For China Products !